Stainless Steel 1.4539 / AISI 904L / X2NiCrMoCu 25-20-5 / Uranus B6 Inox
Stainless Steel Resistant to Corrosion
Stainless Steel
| W.Nr. 1.4539 | Uranus B6 | SIS 2562 |
| AISI 904L | AFNOR Z2NCDU 25-20 | JIS |
| X2NiCrMoCu 25-20-5 | DIN 17740 1.4539 |
1.4539 - AISI 904L offers good corrosion resistance to non-oxidizing acids, such as sulfuric acid under reducing conditions. 1.4539 - AISI 904L is primarily used in the chemical industry. Due to its low carbon content, 1.4539 - AISI 904L is generally applicable after welding without thermal post-treatment.
Stainless Steel - Inox - Steel Uranus B6 - 904L - 1.4539 is supplied in round, forged, hexagonal, square, flat, custom-sized plates.
Dimension Overview
1.4539 - AISI 904L Round Steel, cold drawn, according to DIN EN 10278 (formerly DIN 671), length approx. 3 meters.
Dimensions:
| Ø 6.00 mm | Ø 10.00 mm | Ø 16.00 mm |
| Ø 8.00 mm | Ø 12.00 mm | Ø 24.00 mm |
1.4539 - AISI 904L Round Steel, hot rolled/forged, peeled/pre-turned according to DIN EN 10060 (formerly DIN 1013), length 4-6 meters.
Dimensions:
| Ø 6.00 mm | Ø 20.00 mm | Ø 42.00 mm | Ø 85.00 mm | Ø 130.00 mm | Ø 220.00 mm |
| Ø 8.00 mm | Ø 22.00 mm | Ø 45.00 mm | Ø 90.00 mm | Ø 140.00 mm | Ø 240.00 mm |
| Ø 10.00 mm | Ø 24.00 mm | Ø 50.00 mm | Ø 95.00 mm | Ø 150.00 mm | Ø 250.00 mm |
| Ø 12.00 mm | Ø 25.00 mm | Ø 55.00 mm | Ø 100.00 mm | Ø 160.00 mm | Ø 255.00 mm |
| Ø 13.00 mm | Ø 26.00 mm | Ø 60.00 mm | Ø 105.00 mm | Ø 170.00 mm | Ø 260.00 mm |
| Ø 14.00 mm | Ø 28.00 mm | Ø 65.00 mm | Ø 110.00 mm | Ø 175.00 mm | Ø 275.00 mm |
| Ø 15.00 mm | Ø 30.00 mm | Ø 70.00 mm | Ø 115.00 mm | Ø 180.00 mm | Ø 300.00 mm |
| Ø 16.00 mm | Ø 35.00 mm | Ø 75.00 mm | Ø 120.00 mm | Ø 200.00 mm | Ø 350.00 mm |
| Ø 18.00 mm | Ø 40.00 mm | Ø 80.00 mm | Ø 125.00 mm | Ø 210.00 mm | Ø 400.00 mm |
Cold-drawn steel is not sawn.
Peeled material is also available in sawn pieces.
1.4539 - AISI 904L Forgings
Free-form forgings according to drawings, forged rods, discs, and rings on request.
1.4539 - AISI 904L Hexagonal Steel, cold drawn, tol. h11 according to DIN EN 10278 (formerly DIN 176), length approx. 3 meters
Dimensions:
| 10.00 mm | 19.00 mm | 32.00 mm | 55.00 mm |
| 12.00 mm | 22.00 mm | 36.00 mm | 60.00 mm |
| 13.00 mm | 24.00 mm | 41.00 mm | |
| 14.00 mm | 27.00 mm | 46.00 mm | |
| 17.00 mm | 30.00 mm | 50.00 mm |
1.4539 - AISI 904L Square Steel, hot rolled and pickled, according to DIN EN 10059 (formerly DIN 1014), length approx. 4-6 meters
Dimensions:
| 15.00 mm | 25.00 mm | 40.00 mm | 60.00 mm |
| 20.00 mm | 30.00 mm | 50.00 mm |
1.4539 - AISI 904L Flat Steel, hot rolled and pickled, according to DIN EN 10058 (formerly DIN 1017), length approx. 4-6 meters
On request.
1.4539 - AISI 904L Plates, hot rolled finish 1
Dimensions:
Thickness: 3 mm - 60 mm
Width: 1000 / 1250 / 1500 / 2000 / 2500 mm
Length: 2000 / 2500 / 3000 / 6000 up to max. 15000 mm
1.4539 - AISI 904L Cutting, custom-sized plates
Execution:
Plasma cutting
Waterjet cutting
Laser cutting
Sawing
1.4539 - AISI 904L Blocks, flat, sawn, from forged raw material
Dimensions on request.
Certificates: EN 10204 / 3.1
Various possibilities
Leave your telephone number here, we will call you back as soon as possible.
You can call us at +31 (0) 186 651004 or send an email to info@steelinox.nl