1.4301 / AISI 304 / X5CrNi18-10

Stainless steel                                                    1.4301 / AISI 304                                           Acier Inoxydable

Rustfrit steel                                                                                                                               Acciai Inossidabli

Rostfrit steel                                                                                                                              Acero Inoxidable

C max. 0,07     Cr 17,00 - 20,00     Ni 8,50 - 10,00     Mn 2,00     Si max. 1,00  

1.4301 - AISI 304 is the standard for the austenitic grades of stainless steel due to its good corrosion resistance, ease of formability and fabrication coupeld with its aesthetic appearance in the polished, ground and brushed conditions. Since 1.4301 - AISI 304 is not resistant to intergranular corrosion
in the welded conditions, 1.4307 should rather be specified if welding of larger sections is required and no solution annealing treatment after welding can be performed. Surface conditions plays an important role in the corrosion resistance of this steel with polished surfaces exhibiting far superior corrosion resistance compared with rougher surfaces on the same material.

 

Stock range

1.4301 - AISI 304 round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 3 mtr.
Improved machinability
Sizes:

1.4301 - AISI 304 round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 6 mtr.
Improved machinability
Sizes:

1.4301 - AISI 304 round bar ground tol. h8 acc. to DIN EN 10278 in lengths of 3 mtr
improved machinability
Sizes

1.4301 - AISI 304 round bar ground tol. h6 acc. to DIN EN 10278 in lengths of 3 mtr
Improved machinability
Sizes:

1.4301 - AISI 304 round bar bright acc. to DIN EN 10278, ground K240 in lengths of 3 mtr or 6 mtr
Sizes:

It is also possible to produce special sizes and lengths in a short deliverytime.

1.4301 - AISI 304 round bar hotrolled / forged, peeled / turned acc. DIN EN 10060 ( formerly DIN 1013 ), long 4-6 mtr
Sizes:

1.4301 - AISI 304 Forgings
Forgings acc. to drawings, bars, discs and rings on request.

1.4301 - AISI 304 Blocks / flats, sawn from forged primematerial
Sizes on request.

1.4301 - AISI 304 hollow bars hotrolled - pickled, long 2-7 mtr
Sizes:

From roundbars turned and drilled on request.

1.4301 - AISI 304 square bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr
Improved machinability
Sizes:

1.4301 - AISI 304 hexagon bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr
Improved machinability
Sizes:

1.4301 - AISI 304 square bars hotrolled and pickled tolerance DIN EN 10059 ( formerly DIN 1014 ) long 4-6 mtr
Sizes: 15 mm - 150 mm

1.4301 - AISI 304 flat bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 174 ) long 3 mtr
Sizes: 8 x 4 mm - 160 x 10 mm

1.4301 - AISI 304 flat bars hotrolled and pickled tolerance DIN EN 10058 ( formerly DIN 1017 ) long 4-6 mtr
Sizes: 10 x 4 mm - 200 x 40 mm

1.4301 - AISI 304 flat bars cut /slitted from sheets tolerance DIN EN 10058 ( formerly DIN 1017 ) long 4-6 mtr
Sizes: 10 x 3 mm - 300 x 12 mm

Flat bars grinded K 240/320 from stock possible.

1.4301 - AISI 304 Angle bars cold drawn / cold rolled tolerance DIN 59370 resp. DIN 1022
Sizes: 10 x 10 x 2 mm - 60 x 60 x 6 mm

1.4301 - AISI 304 Angle bars equal hotrolled and pickled tolerance DIN 1028 long 6 mtr
Sizes: 15 x 15 x 3 mm - 180 x 180 x 20 mm

1.4301 - AISI 304 Angle bars unequal hotrolled and pickled tolerance DIN 1029 long 6 mtr
Sizes: 20 x 10 x 3 mm - 200 x 100 x 12 mm

1.4301 - AISI 304 T-profiles hotrolled long 6 mtr
Sizes: T 20 mm - T 120 mm

1.4301 - AISI 304 U-profiles hotrolled long 6 mtr
Sizes: U 20 - U 200

1.4301 - AISI 304 IPB-IPE -profiles hotrolled long 6 mtr
Sizes:
IPE 80 - IPE 300
IPB 100 - IPB 300

We also have the ability to produce special sizes short term.

1.4301 - AISI 304 Sheets/Plates hotrolled Finish 1
Sizes:
Thickness  3 mm - 150 mm
Width         1000 / 1250 / 1500 / 2000 / 2500 mm
Length        2000 / 2500 / 3000 / 6000 / 6000 tot max. 8000 mm

1.4301 - AISI 304 sheets / plates plasma cutting / water-jet cutting / laser-cutting / sawn cuttings
 

Certificates:     EN 10204 / 3.1