Stainless steel                                                    1.4057 / AISI 431                                   

                                                                                                                           

 

W.Nr. 1.4057BS 431S29SIS 2321
AISI 431AFNOR Z15CN16-02JIS SUS431
X17CrNi16-2DIN 17740  1.4057

                               

C 0,12 - 0,22     Cr 15,00 - 17,00     Ni 1,50 - 2.50        

 

1.4057 ìs most commonly used in applications where the 12% chromium steels do not exhibit sufficent resistance to corrosion or when the toughness of the 12% martensitic stainless steels is not sufficient.

 

Stock range 


1.4057 - AISI 431 round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 3 mtr.
Sizes:

Ø 5,00 mmØ 13,00 mmØ 21,00 mmØ 32,00 mmØ 50,00 mmØ 90,00 mm

Ø 6,00 mm

Ø 14,00 mmØ 22,00 mmØ 34,00 mmØ 55,00 mmØ 95,00 mm
Ø 7,00 mmØ 15,00 mmØ 23,00 mmØ 35,00 mmØ 60,00 mmØ 100,00 mm
Ø 8,00 mmØ 16,00 mmØ 24,00 mmØ 36,00 mmØ 65,00 mm
Ø 9,00 mmØ 17,00 mmØ 25,00 mmØ 38,00 mmØ 70,00 mm
Ø 10,00 mmØ 18,00 mmØ 26,00 mmØ 40,00 mmØ 75,00 mm

1.4057 - AISI 431 round bar ground tol. f8 acc. to DIN EN 10278 in lengths of 3 mtr.
Sizes:

Ø 6,00 mmØ 16,00 mmØ 22,00 mm
Ø 10,00 mmØ 18,00 mmØ 25,00 mm
Ø 12,00 mmØ 20,00 mmØ 32,00 mm

 

1.4057 - AISI 431 round bar hotrolled / forged, peeled / turned acc. DIN EN 10060 ( formerly DIN 1013 ), long 4-6 mtr.
Sizes:

Ø 20,00 mmØ 42,00 mmØ 90,00 mmØ 150,00 mmØ 230,00 mmØ 325,00 mmØ 505,00 mm
Ø 22,00 mmØ 45,00 mmØ 95,00 mmØ 155,00 mmØ 232,00 mmØ 330,00 mmØ 525,00 mm
Ø 24,00 mmØ 48,00 mmØ 100,00 mmØ 160,00 mmØ 240,00 mmØ 340,00 mmØ 550,00 mm

Ø 25,00 mm

Ø 50,00 mmØ 105,00 mmØ 165,00 mmØ 242,00 mmØ 350,00 mmØ 555,00 mm
Ø 26,00 mmØ 52,00 mmØ 110,00 mmØ 170,00 mmØ 250,00 mmØ 360,00 mmØ 575,00 mm

Ø 28,00 mm

Ø 55,00 mmØ 115,00 mmØ 175,00 mmØ 260,00 mmØ 375,00 mmØ 590,00 mm
Ø 30,00 mmØ 60,00 mmØ 120,00 mmØ 180,00 mmØ 270,00 mmØ 380,00 mmØ 595,00 mm
Ø 32,00 mmØ 65,00 mmØ 125,00 mmØ 190,00 mmØ 280,00 mmØ 400,00 mmØ 600,00 mm
Ø 35,00 mmØ 70,00 mmØ 130,00 mmØ 200,00 mmØ 290,00 mmØ 425,00 mm
Ø 36,00 mmØ 75,00 mmØ 135,00 mmØ 202,00 mmØ 300,00 mmØ 450,00 mm
Ø 38,00 mmØ 80,00 mmØ 140,00 mmØ 210,00 mmØ 310,00 mmØ 475,00 mm
Ø 40,00 mmØ 85,00 mmØ 145,00 mmØ 220,00 mmØ 320,00 mmØ 500,00 mm

1.4057 - AISI 431 Forgings
Forgings acc. to drawings, bars, discs and rings on request.

1.4057 - AISI 431 Blocks / flat, sawn from forged primematerial
Sizes on request.

1.4057 - AISI 431 square bars hotrolled and pickled tolerance DIN EN 10059 ( formerly DIN 1014 ) long 4-6 mtr.
Sizes: 

40,00 mm60,00 mm90,00 mm
50,00 mm80,00 mm100,00 mm

1.4057 - AISI 431 hexagon bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr.
Sizes:

sw 11 mmsw 19 mmsw 27 mmsw 36 mm
sw 13 mmsw 22 mmsw 30 mmsw 41 mm
sw 17 mmsw 24 mmsw 32 mm

1.4057 - AISI 431 flat bars hotrolled and pickled tolerance DIN EN 10058 ( formerly DIN 1017 ) long 4-6 mtr.
Sizes:

30 x 20 mm50 x 8 mm50 x 30 mm80 x 25 mm
40 x 20 mm50 x 10 mm60 x 20 mm
40 x 30 mm50 x 20 mm80 x 20 mm

1.4057 - AISI 431 Centerless bar precision grinding
Steelinox B.V. supplies centerless ground barsv, in diameters from ø2 to ø 250 mm en lengths up to 13 meter, depending on availability.

We can offer precision grinding to a tolerance of 0,013 mm with a surface finish of Ra 35 ( or better, depending on diameter and grade)

Grinding can be performed on pieces with a minimum length of 2.5 meters. Although it is possible to saw the shafts after grinding, we do not recommend this because of the risk of damage .

Applications: shipping (propeller shafts), hydraulic industry (hydraulic cylinders).

Note: The axes can be aligned to the tolerance specified by you.

Certificates:     EN 10204 / 3.1

  

I want to request an online offer

Go to the form

Request Offer

Leave your telephone number here, we will call you back as soon as possible.

You can call us at +31 (0) 186 651004 or send an email to info@steelinox.nl